FENIX E01 V2.0 Black, 100lm / 35m, Flashlight

Product detailed description

FENIX E01 V2.0 Black, 100lm / 35m, Flashlight

The second generation of the popular mini flashlight Fenix E01 V2.0 offers three power modes with a light output of up to 100 lumens (ANSI). Due to its negligible size, it is an ideal representative of the EDC (Every Day Carry) category, and can be carried at all times, whether in your pocket, on your keys, or in your wallet. The flashlight is not much larger than a AAA battery, from which it is powered. High-quality construction, durability, and waterproofing are a given. The ultra-thin collimator creates a wide light beam with a range of up to 35 meters. The flashlight is designed to serve as a small reliable companion that is always at hand. This useful gift will always bring joy.

All flashlight parameters (light output, battery runtime, waterproofing, range, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E01 V2.0 Flashlight Specifications

• Equipped with a high-performance LED Luminus SST-20 with a lifespan of 50,000 hours.
• Three power levels:
  • Measured with a rechargeable NiMH battery: 100 lumens (50 minutes) -> 25 lumens (4.5 hours) -> 5 lumens (23 hours).
  • Measured with a disposable alkaline battery: 100 lumens (50 minutes) -> 25 lumens (4.8 hours) -> 5 lumens (25 hours).
• Uses only one AAA battery (alkaline, lithium, or rechargeable NiMH). These batteries are inexpensive and widely available.
• The longest runtime is provided by Energizer L92 lithium AAA batteries (especially suitable for extreme temperature conditions).
• Runtime is measured with a rechargeable NiMH battery with a capacity of 750mAh and the included disposable alkaline battery.
• Supported battery voltage 0.9-1.7V.
• Dimensions 6.65 cm (length) x 1.5 cm (head diameter) x 1.4 cm (body diameter).
• Weight 13 grams (without battery).
• Wide light beam with a range of 35 meters (304 cd).
• Made of aircraft-grade hardened aluminum. Durable surface - Type III hard anodized.
• Impact resistant to drops from a height of 1 meter.
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters).
• Reliable rotary switch.
• Includes a metal ring for attaching to keys, a spare sealing o-ring, and an alkaline AAA battery.

Usage

To turn on the flashlight, point the reflector away from you and rotate it counterclockwise (tightening the head). Rotating in the opposite direction turns the flashlight off (loosening the head). To change brightness intensity, quickly turn the flashlight off and on again from the on state. This will switch the flashlight to the next output level. If you leave the flashlight off for more than 1.5 seconds, it will return to the lowest lighting mode (5 lumens).

Overheat protection - during prolonged operation at the highest mode, the flashlight may reduce output to achieve optimal temperature and runtime.

Warnings

• Do not disassemble the sealed part in the head of the flashlight yourself, as this will void the warranty.
• Remove the batteries from the flashlight if you will not be using it for an extended period or if the battery is already depleted, especially with alkaline batteries, as there is a risk of leakage and subsequent damage to the flashlight.
• Insert the battery with the positive pole towards the head of the flashlight.
• If the protective rubber rings appear damaged after prolonged use, replace them.
• If the flashlight flickers, does not switch to higher power modes, or does not light up, it may be due to one of the following reasons:
  • The batteries are almost depleted – replace them.
  • The contacts inside the flashlight are dirty – clean them with a cotton swab dipped in alcohol.